Davey HM Series Pressure Systems with Pressure Switch Uživatelský manuál Strana 6

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 6
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 5
6 7
Connection of Mains Scheme or Town Water
Supply to either Suction or Discharge of Pumps &
Pressure Systems
MostWaterSupplyAuthoritieshavestrictregulationsregardingdirect
connectionofpumpstomainswatersupplies.Inmostcasesanisolating
tankisrequiredbetweenmainssupplyandpump.Daveyalsorecommend
thismethod.Directlyappliedmainspressurecanexceedpumpoperating
pressureanddamagepump.
Davey Water Products Pty Ltd can not accept responsibility for loss or
damage resulting from incorrect or unauthorised installations.
Priming and Operation
1. Removeprimingplugandllcasingand
suctionline(onoodedsuction,simply
opengatevalvetopump).Whenfull,
replaceprimingplug.
2. Ensureoutletnearesttopumpisopen.
MAINS WATER
WARNING: When servicing or attending pump, always ensure power
is switched off and lead unplugged. Electrical connections should be
serviced only by qualied persons. If the electrical supply lead of this
pressure system is damaged, it must be replaced.
3. Ensureallvalvesinsuctionlineareopenandplugintoelectricalsupply.
4.Switchonpowerandthepumpwillrun.Afullowof
watershouldbedischargedfromtheopentap.Allow
watertoowfor10-20seconds,oratleastuntilallairhas
beenexpelledfromthepumpandthenclosetheoutlet.
5.Ifthepumpstopspumping(nowaterow),withthetap
open,stopthepumpandrepeatfromStep1onwards.
Ifthepumpmotorstopswiththetapopenseetroubleshootingchecklist.
6. Closetheopenoutletortapandthepumpshouldstopafterafew
seconds.Ifnot,stopthepumpandrepeatfromStep1onwardsor
consultthetroubleshootingchecklist.
Zobrazit stránku 5
1 2 3 4 5 6

Komentáře k této Příručce

Žádné komentáře